SenseCAP M1 is a high-performing, ready-to-use LoRaWAN indoor gateway compatible with Helium LongFi Network. SenseCAP M1 can connect to The People’s Network within a few simple steps in minutes, and helps you build Long Range applications with low costs. SenseCAP M1 provides miles of wireless network coverage and data transmission capacity for Long Range/LoRaWAN devices. It helps you join and contribute to the infrastructure of The People’s Network while enjoying the benefits of the Helium community.
Highlighted Features
- Handy Setup to Helium Network. 6 steps, 5 minutes, ready to go.
- Powered by Mature Hardware Solutions. Raspberry Pi 4(2G/4G/8G RAM) and WM1302/WM1303 (Semtech SX1302/SX1303) baseband Long Range chip.
- Secured and Reliable. Built-in ECC608 crypto chip, high-security authentication, and reliable connectivity.
- Automatic Online Upgrades. Automatic OTA upgrades, without manual operation.
- Remote Diagnosis. Built-in remote diagnostics mechanism, and efficient online support.
- 64GB Large Storage. 64GB MicroSD card large storage, extending the lifetime of the gateway, fulfilling the memory requirement of potential upgrade.
- Efficient Cooling Solution. Aluminum enclosure with a heatsink and cooling fan inside, ensuring long-term and stable operation.
- Multiple Accessories. Fiberglass antenna, slider pad for sliding rod installation, and upcoming outdoor enclosure, etc.
- FCC and CE Certificated. Available for personal and commercial use.
Specifications
|
Processor |
Raspberry Pi 4 (Broadcom BCM2711, Quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz) |
|
RAM |
2GB / 4GB / 8GB |
|
Storage |
64GB MicroSD Card |
|
Frequency |
EU868 Version: 863MHz ~ 870MHz US915 Version: 902MHz ~ 928MHz AS923 Version: 902MHz ~ 928MHz |
|
Sensitivity |
-125dBm @125KHz/SF7 |
|
-139dBm @125KHz/SF12 |
|
|
TX Power |
Up to 26 dBm |
|
Antenna Gain |
US915 / AS923: 2.6 dBi EU868: 2.8 dBi
|
|
Antenna Impedance |
50 Ohm |
|
Antenna Radiation Pattern |
Omni-Directional |
|
Wi-Fi |
2.4 GHz and 5.0 GHz IEEE 802.11ac wireless |
|
Bluetooth |
Bluetooth 5.0, BLE |
|
LoRaWAN |
Supports Class A, C |
|
Input Voltage |
DC 5V - 3A |
|
Interfaces |
USB Type-C (Power Supply) * 1 Ethernet RJ45 * 1 RP-SMA Female Antenna Connector* 1 |
|
Operating Temperature |
0°C to 50°C |
|
Relative Humidity |
0% - 90% (non-condensing) |
|
Heat Dissipation |
Aluminum enclosure, a heatsink, and a cooling fan |
|
IP Grade |
IP20 |
|
Certification |
FCC / CE / RCM |