Grove Air530 GPS Location - eucaiot Store

Seeed Studio

Grove Air530 GPS Location

Sale priceR 0.00
SKU: 109020022

ACCESSORIES ARE SOLD SEPARATELY.
NOT SURE WHAT TO ORDER? CONTACT US TODAY!

Quantity:

Confused about your GPS not working well in urban or outsides under only one or a few satellite modules? Then you should not miss our new Grove-GPS (Air530).

It’s a high-performance, highly integrated multi-mode satellite positioning and navigation module to use with Arduino. It supports GPS / Beidou / Glonass / Galileo / QZSS / SBAS, which makes it suitable for GNSS positioning applications such as car navigation, smart wear, and drone. Meanwhile, this module is capable of receiving more than 6 satellites at the same time and is able to work excellently even if there's a very bad signal.

Highlighted Feature

  • Positioning error within 10 meters
  • Multi-mode satellite positioning & navigation and support more than 6 satellites at the same time
  • The position still quickly and accurately under the condition of a bad signal
  • Low power consumption at only 31uA
  • Compatible hard/soft interface for other modules
  • Adopt the integrated design of RF baseband, which integrates DC/DC, LDO, LNA, RF front-end, baseband processing, 32-bit RISC-based chip, RAM, FLASH storage, RTC, and power management functions

 

Grove – GPS Module vs Grove – GPS (Air530)

Specs  Grove - GPS Module Grove - GPS (Air530)
Size 40mm x 20mm x 13mm 40mm x 20mm x 13mm
Update Rate 1Hz, max 10Hz -
Baud Rate 9,600 – 115,200 9600 –921600
Navigation Sensitivity -160dBm –166dBm
Power Requirements 3.3/5V 3.3/5V
Number of Channels 22 tracking, 66 channels -
Time to first start Cold start: 13s
Warm start: 1-2s
Hot start: <1s
Cold start: 30 seconds
Warm Start: 4 seconds
Antennas Included Included
Accuracy 2.5m GPS Horizontal Position Accuracy 2.5m Horizontal Position Accuracy

 

Specifications

PARAMETERS

VALUES

Supply Voltage

3.3V/5V

Working Current

up to 60mA

Interface

UART

Time of Warm Start

4s

Time of Cold Start

30s

Working Temperature

-35C-85°C

Storage Temperature

-55°C-100°C

Humidity

5%-95%

Time of Positioning

Pure Hardware Cold Start

27.5s

Pure Hardware Hot Start

<1S

Pure Hardware Recapture

<1S

Software-assisted A-GNSS

<5S
Sensitivity Cold Start -148dBm
Hot Start -162dBm
Recapture -164dBm
Track -166dBm
Accuracy Horizontal Positioning 2.5m
High Positioning 3.5m
Speed 0.1m/s
Time Transfer 30ns
Consumption @ 3.3V Capture current value 42.6mA
Tracking current value 36.7mA
Low power mode 0.85mA
Ultra-low-power mode 31uA

* CAUTIONS & NOTES

The test above is taken under bi-modules of GPS & Beidou.
  • The input power supply voltage of the Grove power supply interface, should not exceed 5.6V, otherwise, it may damage the device.
  • The voltage of the selected button battery should not exceed 3V, or it will probably damage the device.

 

Pinout

Applications

  • GPS tracker
  • GPS navigation
  • Distance measurement
  • Car navigation
  • Drone

Documentation

GPS Air530 - Wiki

Air530 to Arduino - How to Video

Air530 to Arduino - How to Guide