Superheterodyne wireless transceiver module-433MHz - eucaiot Store
Superheterodyne wireless transceiver module-433MHz - eucaiot Store
Superheterodyne wireless transceiver module-433MHz - eucaiot Store

Seeed Studio

Superheterodyne wireless transceiver module-433MHz

Sale priceR 0.00
SKU: 114992733

ACCESSORIES ARE SOLD SEPARATELY.
NOT SURE WHAT TO ORDER? CONTACT US TODAY!

Quantity:

This is a complete wireless transmitting and receiving kit, which can be applied to simple data wireless transmission, wireless remote control, anti-theft alarm systems, etc. The kit is composed of ASK transmitter and receiver modules with superior performance and low cost. The carrier frequency is 433MHz.

Highlighted Features

  • Low power consumption: 3.3V about 3.8mA / 5V about 4.2mA(315MHz)

  • High receiving sensitivity: -109dBm@10kbps

  • Wide temperature range: -40~85℃

  • Flexible application, breadboard, and PCB friendly

  • Strong radiation suppression ability: no mutual interference, no influence on receiving distance.

The popular link is like this: MCU -> Encoder -> Transmitter ------ Receiver -> Decoder -> MCU. You can use this kit to build a system with other main control equipment, such as Arduino, and Seeeduino XIAO, to implement applications such as wireless security alarms, remote control tools, and so on.

The following is the introduction of the transmitter and receiver respectively.

[Transmitter]

In the wireless transceiver kit, the wireless transmitter module model is APF03, and its working voltage range is 3-12v.It adopts OOK modulation mode, which has the advantages of fast modulation rate and long transmission rate.

OOK (on-off keying) is binary switching keying. The modulation principle is to control the passage of the carrier by controlling the opening and closing of the switching device through the binary sequence, so as to load the binary signal onto the carrier. It is a low-cost and most easily implemented modulation method, which is widely used in various occasions.

[Receiver ]

In addition, the model of the decoding wireless receiving module is RXB28, and the working frequency is 315MHz or 433.92MHz. The recommended power supply input is 5V. At this time, when the operating frequency is 315MHz, the current can be as low as 4.2mA, and the power consumption is very low.

The receiving structure of this module is a superheterodyne method, receiving OOK

wireless signal. After receiving the signal, it will directly output the COMS signal to the external IC for decoding. It has good local oscillator radiation suppression capability and can work with multiple receiving modules.

Applications

  • Car remote control door switch (RKE)

  • Remote access control

  • Wireless security alarm

  • Remote control curtain machine

  • Wireless industrial controller

  • Wireless data transmission

  • Wireless remote control robot

Pinout

Transmitter

The pins are arranged from left to right as follows:

Pin

Name

Function declaration

1

VCC

Positive pole

2

GND

Negative pole

3

DATA

Signal pin

4

ANT

Antenna pin

 

The transmitter module has a small volume and a standard 2.54 spacing for convenient installation.

Receiver

The pins are arranged from left to right as follows:

Pin

Name

Function declaration

1

ANT

Antenna pin

2

VCC

Positive pole

3

DATA

Signal output

4

DATA

Signal output

5

GND

Negative pole