Wireless CO2 Sensor - eucaiot store

Seeed Studio

Wireless CO2 Sensor

Sale priceR 4,876.04
SKU: 114991728
Quantity:
Pickup available at EUCA Head Office Usually ready in 24 hours

Wireless CO2 Sensor

EUCA Head Office

Pickup available, usually ready in 24 hours

Clearwater Office Park
Block H Ground Floor
Boksburg
Gauteng
1459
South Africa

+27123623271

* ABOUT SENSECAP

Among the first launch of Seeed industrial IoT (IIoT) product series, SenseCAP is focusing on wireless environmental sensing applications: smart agriculture, precision farming, and smart city, to name a few. It consists of hardware products (sensors, data-loggers & gateways, etc.), software services (SenseCAP portal, mobile App, open dashboard), an API for device & data management.

* Contact Us should you require support with SenseCAP

 

SenseCAP easy Deployment

SenseCAP Wireless CO2 Sensor measures levels of CO2 emission in the atmosphere, designed with an NDIR CO2 sensor and a custom battery. It's dustproof, optimal for use cases that need reliable data collection, even in dusted indoor environments such as chicken farms.

SenseCAP Wireless CO2 Sensor measures the level of carbon dioxide (CO2) gas at the range of 0 ~ 40000 ppm in the atmosphere, applicable for indoor environments. It is perfect for monitoring CO2 ppm in greenhouses, industrial campuses, factories, schools, office buildings, hotels, hospitals, transportation stations, and anywhere that data of CO2 emission is needed.

This device incorporates a built-in LoRa transmitter based on SX1276 for long-range transmission, an NDIR CO2 sensor, and a custom battery. It is specifically designed and optimized for use cases powering end devices by batteries over the years. To minimize the power consumption, the device wakes up, transmits the collected CO2 data to the gateway, and then goes back to sleep.

Under the best of circumstances, the battery is expected to last for 1.5 years, depending on the data transmission intervals. Please kindly note that the default interval is once per hour. If you'd like to change the data upload interval, please refer to this document.

SenseCAP Sensor Node adopts a modular design, integrating the data logger with the sensor probe, which is replaceable by other SenseCAP sensor probes.

The data logger part is designed with industry standards and equipped with an IP66 waterproof enclosure. To ensure accuracy and sensitivity, we chose the material with the optimal breathable aperture for the sensor probe, which however is not waterproof. Hence, this CO2 Sensor is applicable only for indoor environments. The product is dustproof, making it ideal for environments such as chicken farms, where there is poultry dust.

SenseCSAP Sensor Technical Diagram

* NOTE

SenseCAP Sensors are fully compliant with LoRaWAN specifications and can be used with standard LoRaWAN gateways. Please choose the corresponding gateway according to the sensor frequency. Seeed also provides SenseCAP LoRaWAN Gateway for you to use with SenseCAP Sensors seamlessly without an extra huge workload for provisioning.


System Architecture

SenseCAP System Architecture

SenseCAP Sensor + Other LoRaWAN Gateway Architecture

SenseCAP and other LoRaWAN Gateway

Key Features

  • Supports LoRaWAN protocol - Class A
  • NDIR CO2 sensor technology
  • Dual-channel detection for superior stability
  • Ultra-wide-distance transmission: 10km in line of sight scene, 2 km in urban scenes
  • Battery life: ≥ 1.5 years
  • Rapid installation and deployment

Applications

  • Smart Agriculture/ Precision Agriculture
  • Smart Building and Industrial Control
  • Environmental Monitoring
  • Other Wireless Sensing Applications

Specifications:

CO2
Parameters Condition Value
Range - 0 to 40000 ppm
Accuracy 400 to 10000ppm ±(30 ppm + 3 %MV)
Resolution - 1 ppm
Temperature Stability T = 0 to 50 ℃ ±2.5 ppm/℃
Parameters
Product Model LoRa-S-868-CO2-01
Microcontroller Ultra-low-power MCU
Support Protocol Based on LoRaWAN v1.0.2 protocol
LoRa Channel Plan EU868
LoRa Power Output 16 dBm (EIRP)
Sensitivity -137.5dBm(SF12, BW125KHz)
Current Consumption 5 μA (sleep mode)
120 mA max(active mode)
Communication Distance 2 to 10 km (depending on different antennas and environments)
IP Rating IP66 (Sensor Node); Indoor (Sensor Probe)
UV Resistance anti-aging (from rain/sun exposure): UL746C F1
Enclosure Material PC
Operating Temperature 0 ℃ to +50 ℃
Operating Humidity 0 to 95 %RH
Device Weight 319g
Certification CE, FCC, RoHS
Battery (Contained in equipment)
Battery Life ≥ 3 years (upload data once per hour)
Battery Voltage 3.6V
Battery Capacity 19Ah (non-rechargeable)

LoRa Frequency

The device is designed with a fixed LoRa channel, which can not be modified by users. The supported channels are as follows. Please refer to this document for how to connect this device with a LoRaWAN gateway.

 

LoRa Channel Plan
Uplink (MHz) 868.1 - SF7BW125 to SF12BW125
868.3 - SF7BW125 to SF12BW125 and SF7BW250
868.5 - SF7BW125 to SF12BW125
867.1 - SF7BW125 to SF12BW125
867.3 - SF7BW125 to SF12BW125
867.5 - SF7BW125 to SF12BW125
867.7 - SF7BW125 to SF12BW125
867.9 - SF7BW125 to SF12BW125
Downlink (MHz) Uplink channels 1-8 (RX1)
869.525 - SF9BW125 (RX2 downlink only)
 

 

SenseCAP & LoRaWAN Gateway Catalog

SenseCAP Sensor User Manual

SenseCAP User Guide (LoRaWAN)

SenseCAP Document Centre

SenseCAP CE Certificate

 

SenseCAP Wireless CO2 Sensor measures levels of CO2 emission in the atmosphere, designed with an NDIR CO2 sensor and a custom battery. It's dustproof, optimal for use cases that need reliable data collection, even in dusted indoor environments such as chicken farms.