RF Explorer 3G+ IoT modules are ready-to-use, advanced Spectrum Analyzer devices you can configure and control easily with Raspberry Pi using a compatible Touchscreen and free RFETouch software.
These modules are cost-effective platforms to develop your own customized Spectrum Analyzer, Power Detector, RF activity alarm, RF sniffer, RF QA test bench, etc.
Programmability and network capabilities of the hosting platform enable remote control and diagnosis scenarios, fully automated RF alarm systems, and advanced assistance for unattended detection requirements such as those of radio operators, cell towers, and HAM stations.
Additional items required but not included in the kit are:
- Raspberry Pi models 2, 3 or 4
- USB power source for Raspberry Pi and Touchscreen
These items can be reused from other experiments or ordered together with the kit.
Specifications
RF Explorer 3G+ IoT module
| Includes the advanced 3G+ MWSUB3G RF Explorer Module | |
|---|---|
| Frequency band coverage | 15-2700 MHz |
| Antenna connector | Standard SMA 50 ohms |
| The advanced selectable internal input stage | Normal, LNA, 30dB attenuator |
| Amplitude resolution | 0.5dBm |
| Dynamic range | -130dBm to +10dBm |
| Absolute max input power | +30dBm |
| Average noise floor level (typical with LNA enabled) | -120dBm |
| Frequency stability and accuracy (typical) | +-10ppm |
| Amplitude stability and accuracy (typical) | +-3dBm |
| Frequency resolution | 1 KHz |
| Resolution bandwidth (RBW) | Automatic 3KHz to 600KHz |
| Power consumption | 100 - 500mW |
| All modules are factory calibrated | |