Single Channel LoRa IoT Gateway

Single Channel LoRa IoT Gateway

$219.43
SKU:
LG01v2-868-E
ALL PRICES DISPLAYED ARE EXCLUSIVE OF VAT.

ACCESSORIES ARE SOLD SEPARATELY.
NOT SURE WHAT TO ORDER? CONTACT US TODAY!

Vendor:

* NOTE

 

This Gateway is for use with the Private LoRa Protocol and is not recommended for LoRaWAN use.

* Import Duties and Taxes (VAT) are EXCLUDED.

* This gateway is only available in EU868 MHz

 

OLG01-N is an open-source single-channel LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, Or 3G/4G cellular via an optional LTE module. The LoRa wireless allows users to send data and reach extremely long ranges at low data rates. It provides ultra-long range spread spectrum communication and high interference immunity.

OLG01-N has rich internet connection methods such as a WiFi interface, Ethernet port, and USB host port. These Interfaces provide flexible methods for users to connect their sensor networks to the Internet.

OLG01-N can support Limited LoRaWAN protocol in single frequency and customized LoRa transmit protocol. Different from OLG01, OLG01-N uses Linux to directly control the sx1276/sx1278 LoRa module which increases the communication efficiency and simplifies the software design.

OLG01-N can be used to provide a low-cost IoT wireless solution to support 50~300 sensor nodes.

Except for LoRaWAN mode, LG01-N can support multiple working modes such as MQTT mode, and TCP/IP Client mode to fit the different requirements for IoT connection.

LG01-N is based on the sx1276 solution which provides a low cost for your IoT network connection. Compare the cost with the normal SX1301 LoRaWAN solution. the LG01-N is only of its 1/4 or less cost. This makes the OLG01-N very suitable to set up a small-scale LoRa network.

Highlighted Features

  • Open Source OpenWrt system
  • Low power consumption
  • Firmware upgrade via Web
  • Software upgradeable via network
  • Flexible protocol to connect to IoT servers
  • Auto-Provisioning
  • Built-in web server
  • Managed by Web GUI, SSH via LAN or WiFi
  • Internet connection via LAN, WiFi, Or 3G/4G via an optional LTE module
  • Failsafe design provides a robust system
  • 1 x SX1276/SX1278 LoRa module
  • Limited support in LoRaWAN/ Support Private LoRa protocol
  • Support up to 300 nodes
  • LoRa band 868MHz
  • Max range in LoRa: 5~10 km. Density Area:>500m

Specification

Linux Side:

  • Processor: 400MHz, 24K MIPS
  • Flash: 16MB; RAM: 64MB

Cellular 4G LTE (optional):

  • Quectel EC25 LTE module (Click the link to find the right model for your region)
  • Micro SIM Slot
  • Internal 4G Antenna + External 4G Sticker Antenna.
  • Up to 100Mbps downlink and 50Mbps uplink data rates
  • Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage
  • MIMO technology meets demands for data rate and link reliability in modem wireless communication systems

Interfaces:

  • 10M/100M RJ45 Ports x 2
  • WiFi: 802.11 b/g/n
  • LoRa Wireless
  • Power Input: 12V DC
  • 1 x LoRa Interface

System Overview

system overview

Documentation

Datasheet User Manual

Source Code: Hardware - Motherboard

Source Code: Hardware - LoRa Module

Source Code: Software

LoRa Gateway Selection Guide